Nanoglans E-foamer Pro

EN How to use the Nanoglans E-Foamer?

  1. Fill the bottle with 1 to 1.5L water (preferably warm water, not boiling).
  2. Add 50-100ml car shampoo.
  3. Then shake well and press the white lever marked START once. This will build pressure until it stops. Then you can keep pressing to spray the foam.
  4. Distribute the foam evenly over the surface to be cleaned, from bottom to top.
  5. Allow the foam to work for a few minutes for optimal cleaning.
  6. Clean with a wash mitt and gently remove dirt.
  7. Rinse the car thoroughly with clean water.

Tip: For an optimal even spray, rinse the filters in the nozzle head with warm water.

      Zwarte cilindrische connector met zichtbare vezelkern

Close-up of a black connector with a visible pink fiber core. The arrow points to the detail at the top.

✅ Ready for a brilliant result without effort!

Specifically for 1.0–1.5 L of water

  • Standard cleaning: 50 ml per liter
    • 1.0 L: 50 ml
    • 1.5 L: 75 ml
  • Heavily soiled: 75–100 ml per liter
    • 1.0 L: 75–100 ml
    • 1.5 L: 110–150 ml



efoamer guide nl