1. Quick protective layer
Apply the foam to a clean, wet vehicle. Ideal for cars as well as large surfaces on motorhomes or caravans.
LATHER · RINSE · PROTECT
Concentrate per bottle
Days of protection, depending on use
On a clean and wet vehicle
Choose the bottle bundle that suits you
HYDROPHOBIC SNOW FOAM
Nanoglans Hydrophobic Snow Foam is a protective foam for after washing. The foam layer helps spread the formula over the surface. Upon rinsing, the water-repellent finish becomes visible.
The hydrophobic layer helps prevent water and dirt from sticking as easily. You will see water beads after rinsing.
Give clean paintwork a neat finish and refresh the protection of an existing coating.
Apply evenly using a foam cannon or foamer, leave to work briefly and rinse thoroughly.

CAR WASHED? GIVE IT SOMETHING EXTRA.
A visible finish and protection, without waxing your entire vehicle.
Apply the foam to a clean, wet vehicle. Ideal for cars as well as large surfaces on motorhomes or caravans.
The water-repellent finish makes the surface easier to maintain during the next wash.
The lifespan depends on preparation, use, washing frequency, and weather conditions.
Give the paint extra shine and refresh an existing coating during your maintenance session.
Apply, leave on briefly, and rinse thoroughly. Then dry carefully for a neat finish.
ALSO FOR MOTORHOMES AND CARAVANS
Protect your motorhome or caravan after washing? With a foam cannon, you can apply the product over large surfaces and reach even tricky areas.
The water- and dirt-repellent layer can help prevent dirt from sticking as easily. Black rain streaks can still form: dirt from the roof, seams, and rubber seals still requires maintenance. First wash away any existing streaks, then apply the protection.

HOW TO APPLY THE PROTECTION
Work in the shade on a cooled vehicle. Never let the product dry out. Also follow the instructions on your bottle and device.
First, remove dirt with your regular pre-wash and hand wash. Rinse thoroughly. Apply Hydrophobic Snow Foam to the still wet, clean surface.
Dilute the product for your device according to the dosage below. Apply evenly and leave to work for a few minutes, without letting it dry.
Rinse off all residue. The water-repellent finish becomes visible during rinsing. Dry afterwards with a clean microfiber drying cloth.
PRODUCT INFORMATION AND DOSAGE
| Product | Nanoglans Hydrophobic Snow Foam 1L – Ceramic shampoo |
|---|---|
| Contents | 1 liter of concentrate per bottle; available as a pack of 1, 2 or 3 bottles |
| Application | Protective foam after washing your car, motorhome or caravan |
| Foam cannon | 50 ml product + 450 ml water |
| Hand Foamer or eFoamer | 30–50 ml product + 1.5 liters water |
| Apply | On a clean, wet and cooled-down vehicle, out of direct sunlight |
| Onboarding | A few minutes; never let it dry. Then rinse thoroughly and dry |
| Duration of protection | Up to 90 days, depending on preparation, use, washing frequency and conditions |
| Substrates | Suitable for paint, matte paint, wrap, glass and plastic on the exterior when used correctly |
| Existing coating | Use as a maintenance booster for the water-repellent effect |
FREQUENTLY ASKED QUESTIONS
Clear answers about dosage, surfaces and protection.
No. You use regular Snow Foam as a pre-wash to loosen dirt. You apply Hydrophobic Snow Foam after washing for water-repellent protection, extra shine, and to refresh a coating.
Yes. Apply the product to a clean and still wet vehicle. This way, you spread the protection over the surface instead of over any remaining dirt.
Mix 50 ml of product with 450 ml of water in the reservoir. Also follow the instructions of your foam cannon and on the bottle label.
Use 30–50 ml of product per 1.5 litres of water. Distribute evenly, leave on briefly, and rinse thoroughly before the product dries.
Up to 90 days. The actual duration depends on preparation, vehicle usage, washing frequency, and weather conditions. You can refresh the water-repellent effect during a service.
Yes, for protecting and maintaining suitable exterior surfaces after washing. If in doubt, test on an inconspicuous area first and follow the vehicle manufacturer's maintenance instructions.
No. The protective layer makes it harder for water and dirt to stick, but dirt from roofs, seams, and rubber can still cause streaks. Remove existing streaks first and continue to wash the vehicle regularly.
Yes. Hydrophobic Snow Foam is suitable as a maintenance booster to refresh shine and water-repellent properties. It is not a replacement for any long-term coating.
Yes, when used correctly on exterior surfaces. Work in a cool area away from direct sunlight, do not allow the product to dry out, and rinse glass and other surfaces thoroughly.
Choose 1 Bottle, 2 Bottles, or 3 Bottles at the top. Each selected bundle contains the specified number of 1-liter bottles; you do not need to enter an additional quantity.
FITS INTO YOUR NANOGLANCE WASH ROUTINE
These additional products are available separately.


HAND WASH
Clean the surface before applying Hydrophobic Snow Foam.

AFTER RINSING
Carefully dry the clean vehicle with soft microfiber towels.