Nanoglans Foam & Water Spray Gun + Nanoglans SNOW FOAM V2 Shampoo

Snow Foam is a powerful pre-wash shampoo that effortlessly loosens stubborn dirt.

Even with minimal foam, the shampoo delivers top performance. Thanks to its micro-bubble technology, dirt is safely encapsulated and washed away, preventing wash scratches. With a wash mitt, you can effortlessly wipe away dirt.

In addition, the advanced gloss enhancer ensures a deep, mirror-like shine, making your car look radiant after every wash.

No expensive high-pressure cleaner needed, with the Nanoglans Foam & Water gun you can get started right away.
In combination with the Nanoglans SNOW FOAM shampoo 2.5L, washing your vehicle becomes super easy.

How to use?

Fill the reservoir with Nanoglans SNOW FOAM shampoo 2.5L. You determine the amount of foam yourself with the adjustable knob from 0 to 4. The higher the number, the more foam. This ratio works best at 2. You spray the entire vehicle with a rich layer of foam and use the Nanoglans Wash Mitt to properly wash the car or a high-pressure cleaner. You can then rinse the car at setting 0. You can also use 150ml of snow foam and fill it with water and then dial to 5. Slightly less foam, but the effect is the same and it is more economical.

Method:

1. Fill the reservoir with SNOW FOAM.
2. Set the gun dial to 1 or 2 (if using pure snow foam).
3. Foam the car from top to bottom.
4. Let it sit for 3 to 5 minutes.
5. Use a wash mitt or high-pressure washer.
6. Rinse with water.
7. Dry with, for example, our super microfiber towel.

Sand seems harmless, but it acts like sandpaper on your paint. When you spray a dirty car with a high-pressure cleaner without preparation, you push thousands of sharp dirt particles hard against the paint. With all the consequences that entails:

🔹 Micro-scratches & swirls
Invisible in daylight, but painfully visible in the sun—especially on dark paint. Only polishing can restore it.

🔹 Paint damage at a microscopic level
Stubborn dirt can affect the protective layer and cause lasting damage.

🔹 Loss of shine
The paint loses its deep, smooth appearance. Your car looks dull, even after washing.

What should you do?

1. Use a pre-wash like our Snow Foam.
   This safely loosens dirt and sand without rubbing.
2. Let it soak in for a while.
   Give the foam time to do its work.
3. Only then rinse with the high-pressure cleaner.
   This way, the dirt glides off your paint without damage.

✅ Result: a scratch-free, shiny car without risk.
Because truly safe washing starts with the right preparation.

Frequently Asked Questions

Manual EN