Nanoglans Hand Foamer 3 Bar + Snow Foam 2.5L – Car Pre-Wash Without Pressure Washer
Do you want to safely pre-wash your car with a thick layer of active foam, but don't have a pressure washer or foam cannon? With the Nanoglans Hand Foamer 3 Bar + Snow Foam 2.5L, you have everything you need for a powerful and easy pre-wash.
The manual pressure foamer builds up to 3 bar pressure and distributes the Snow Foam as a full foam layer over the vehicle. The foam adheres well to the surface, allowing stubborn dirt, dust, road film, and insects to loosen before you hand wash the car.
No electricity, garden hose, or pressure washer needed. Just fill, pump up the pressure, and foam.
Why pre-wash your car with Snow Foam?
When washing, you want to rub as little dirt as possible over the paint. A good pre-wash helps loosen a large part of the surface dirt before you touch the paint with a wash mitt.
That makes the Nanoglans Hand Foamer ideal as the first step of a safe wash.
Advantages:
- Powerful hand foamer up to 3 bar
- Produces a thick and even foam layer
- Works without electricity or pressure washer
- Ideal for pre-washing cars
- Helps loosen dirt and insects
- Reduces direct contact with dirt during hand washing
- 360° suction system for comfortable use
- Made of extra strong material
- Suitable for intensive detailing use
- Includes 2.5 liters of Nanoglans Snow Foam
Highly Concentrated Nanoglans Snow Foam
The included Nanoglans Snow Foam 2.5L is developed as a powerful pre-cleaner for vehicles.
The formula creates a full foam layer that adheres to the surface and helps loosen dirt. After a few minutes, you simply rinse away the loosened dirt.
Due to its high concentration, you only need a limited amount of product per wash.
Recommended mixing ratio for the Hand Foamer
Fill the foamer with approximately:
1.5 liters of water + 50–100 ml Nanoglans Snow Foam.
The exact amount can be adjusted depending on how much foam you desire and how dirty the vehicle is.
How to use the Nanoglans Hand Foamer?
- Fill the Hand Foamer with water and Snow Foam.
- Close the foamer tightly.
- Pump until sufficient pressure is built up.
- Apply an even layer of foam to the vehicle.
- Allow the Snow Foam to work for approximately 3–5 minutes.
- Do not let the product dry.
- Rinse the vehicle thoroughly with water.
- Then, if necessary, wash the car further with car shampoo and a soft wash mitt.
Do not use in direct sunlight or on a hot surface.
Can I use Snow Foam without a pressure washer?
Yes. That's exactly what this set is ideal for.
A traditional foam cannon connects to a pressure washer. The Nanoglans Hand Foamer builds its own pressure manually and therefore does not need a Kärcher, Nilfisk, Kränzle, or other pressure washer.
This allows you to foam in places where you do not have electricity or a pressure washer available.
What can you use the Hand Foamer for?
The set is ideal for cleaning and pre-washing, among other things:
- Cars
- Motorcycles
- Bicycles
- Campers
- Vans
- Rims
- Hard-to-reach parts of vehicles
Due to its compact design, you can also easily take it with you.
Hand Foamer or Foam Cannon?
A foam cannon uses the water pressure of a pressure washer and can therefore foam an entire car very quickly.
A hand foamer works completely independently. You build up the pressure manually and do not need electricity or a pressure washer.
Do you primarily want maximum mobility and the ability to easily foam wherever you want? Then the Nanoglans Hand Foamer 3 Bar is an excellent choice.
What's included in this set?
- 1× Nanoglans Hand Foamer 3 Bar
- 1× Nanoglans Snow Foam V2 – 2.5 liters
This gives you a complete combination for a powerful and safe pre-wash right away.
