Nanoshine Foam Gun in action:
How to use?
Fill the reservoir with Nanoglans SNOW FOAM shampoo 2.5L. You determine the amount of foam yourself with the adjustable knob from 0 to 4. The higher the number, the more foam. This ratio works best on 2. Spray the entire vehicle with a rich layer of foam and use the Nanoglans Wash Glove to thoroughly wash the car or use a high-pressure washer. You can then rinse the car at setting 0. You can also use 150ml of snow foam and fill it with water, then set the dial to 5. Slightly less foam, but the effect is the same and it's more economical.
Why you should never spray sand directly with a high-pressure cleaner
Sand seems harmless, but it acts like sandpaper on your paintwork. When you spray a dirty car with a high-pressure cleaner without preparation, you push thousands of sharp dirt particles hard against the paint. With all the consequences that entail:
🔹 Micro-scratches & swirls
Invisible in daylight, but painfully visible in the sun—especially on dark paintwork. Only polishing can restore it.
🔹 Paint damage at a microscopic level
Stubborn dirt can damage the protective layer and cause permanent damage.
🔹 Loss of shine
The paint loses its deep, smooth appearance. Your car looks dull, even after washing.
What should you do?
-
Use a pre-wash like our Snow Foam.
This safely loosens dirt and sand without rubbing. -
Let it soak in for a while.
Give the foam time to do its job. -
Only then rinse with the high-pressure cleaner.
This way, the dirt slides off your paintwork without damage.
✅ Result: a scratch-free, shiny car without risk.
Because truly safe washing starts with the right preparation.
